Rear Spring Plate Cover SZ952000770

Description

It is installed on the upper part of the rear leaf spring, above the horse-harness bolt, to compress the leaf spring assembly; evenly distribute the pressure of the horse-harness bolt onto the leaf spring to prevent local stress concentration and fracture of the leaf spring; protect the top surface of the leaf spring from impact by gravel and corrosion by mud and sand; lock the position of the leaf spring to prevent the leaf spring from shifting during heavy load bouncing, and ensure the uniform transmission of the load of the rear axle suspension.

1. OEM replacement parts, with exact matching of hole spacing and overall dimensions to the original vehicle. They can be directly installed without modification.
2. Cast steel or thick steel plate formed by stamping, with strong load-bearing capacity and resistance to heavy-load impact.
3. Smooth surface processing, uniform force distribution, avoiding stress points.
4. Surface painted for rust prevention, resistant to mud, water, salt and alkali corrosion, suitable for mining, construction waste, and long-distance heavy-load conditions.
5. Standard saddle bolts installation holes are reserved, making assembly alignment simple.
6. Factory size inspection is conducted to ensure flatness.

Solved Problems
1. The original hood panel cracked, deformed, and wore out → The horse bolt exerted concentrated pressure, causing the steel spring to easily break into pieces.
2. The cover plate was rusted and thinned, and broke → The spring was loosened and shifted, and the rear axle alignment was abnormal.
3. The old cover plate was not flat and the force was uneven → The horse bolt was prone to loosen or break.
4. The cover plate lacked protection → Mud, sand, and stones directly hit the steel spring, accelerating the corrosion and fatigue of the spring.