1. Part Number: DZ15221115111, Commonly known as: Front Grille, Hood Air Intake Grille
2. Product Name: Front Hood Panel Middle Grille Assembly
3. Compatible Vehicles: Shaanxi Auto DeLong M3000S, M3000E Tractor, Dump Truck, Mixer Truck
4.Installation method: Multiple plastic snap-in clips + positioning holes, directly snap-fit and fix on the outer side of the front cover body DZ15221115201;
5. Material: Modified PP engineering plastic, black high-gloss paint finish, reserved installation holes for vehicle logo;
6.Net weight: Approximately 3.4kg;
1. Air intake and cooling
The grille's perforated air duct guides the incoming cold air into the cabin, directing it towards the radiator and intercooler, ensuring cooling for the engine and intercooler; controlling the air intake flow to prevent high-temperature heavy loads from causing high engine water temperature, high intercooler temperature, and power loss.
2. Protection and filtration
Preventing large stones, branches, and large debris from directly hitting the water tank and intercooler core, preventing the core from being damaged and leaking; filtering out large particles of sand and stones to reduce the risk of the radiator getting clogged.
3. Positioning and fixation
Providing an installation base for the car logo and front fascia trim; using snap fasteners for positioning, ensuring uniform gaps in the front face and reducing shaking and abnormal noise during driving.
The actual problems solved by this part
1. The middle grille is damaged and breaks, losing its protective function. Stones can easily penetrate the water tank inside, causing water leakage and overheating failure;
2. The grille is missing or cracked, resulting in turbulent airflow and decreased heat dissipation efficiency. Heavy loads can cause high water temperature;
3. The snap fasteners break and the middle grille becomes loose and slack. The vehicle shakes and makes abnormal noises during driving. The gap at the front end becomes larger and the appearance is damaged;
4. The middle grille is damaged and the car logo has no installation base. The appearance of the front end is incomplete.
Common damage scenarios: rear-end collision, stone strikes, long-term exposure to sunlight causing aging and cracking, and violent breaking of snap fasteners during disassembly and assembly.
Q: Which truck fits this grille?
A: Specially for SHACMAN M3000S and M3000E series. NOT compatible with old M3000, F3000, X3000, X5000. It clips onto front mask body DZ15221115201.
Q: Main functions & problems solved
A: Air intake & heat dissipation: Guide cooling airflow to radiator and intercooler, avoid engine high‑temperature under heavy load.
2. Physical protection: Block stones and debris, prevent radiator core from impact damage.
3. Exterior decoration: Provide mounting base for SHACMAN logo, keep front‑face complete appearance.
4. Positioning support: Reduce shaking and abnormal noise during driving.
Problems solved:
‑ Prevent radiator damage caused by flying stones.
‑ Avoid disordered airflow and poor cooling performance after grille broken.
‑ Eliminate grille shaking and big front‑face gap caused by broken clips.
Q: Important installation & shipping notes?
A: Large plastic exterior part, must pack with wooden frame for sea shipment, avoid squeeze crack.
‑ Check clip bases of front mask body DZ15221115201 during replacement.
‑ Do not over‑force during installation to prevent clip breakage.
Q:What is your warranty term?
A: 3‑month warranty for non‑artificial damage. Warranty void for collision damage, transportation crack, UV aging.
Hot Tags: shacman auto delong m3000s driver's cabin panel grille dz15221115111, China shacman auto delong m3000s driver's cabin panel grille dz15221115111 manufacturers, suppliers, factory, DZ15221740016, DZ96259590761, Fast 12 speed Manual Transmission Gearbox 12JSDX220T B, Fast Transmission Reduction Gear 12JSDX240T 1707106, QH50, REAR ENGINE MOUNT DZ97259590209
