AC Condenser Assembly / Air Conditioner Condenser DZ13241824370
Compatible vehicle models: Shacmam DeLong F3000, X3000, and some new M3000 models can also be compatible. Heavy truck cab air conditioning system.
Key distinction: This is the air conditioner condenser (for cooling the refrigerant), not the engine water-cooled large water tank.
High-temperature high-pressure refrigerant heat dissipation: The high-temperature and high-pressure gaseous refrigerant compressed by the compressor enters the condenser. The vehicle is facing the wind + the electronic fan blows air onto the aluminum fins, dissipating the heat of the refrigerant into the air, and the gaseous refrigerant is cooled and liquefied.
Ensure the cooling capacity of the air conditioner: Only when the refrigerant is fully condensed and liquefied, and then enters the expansion valve and evaporator, can the cab blow out cold air.
Integrated structure with the liquid storage dryer bottle (this model is a liquid storage type condenser with overcooling). It simultaneously completes refrigerant drying, filtering impurities, adsorbing moisture in the refrigerant, and preventing ice blockages that may damage the air conditioning system.
Material: Aluminum parallel flow structure, aluminum flat tubes + aluminum heat dissipation fins, aluminum collecting pipe, lightweight, high heat exchange efficiency
• Structure: Parallel flow integrated type, integrated liquid storage and drying bottle, equipped with original fixed brackets, installation rubber pads, refrigerant pipeline connectors
• Medium: Automotive air conditioning refrigerant R134a
• Features: Corrosion-resistant, high heat dissipation efficiency; equipped with fixed lifting ears, direct installation at original vehicle holes, no damage replacement
• Net weight: Approximately 4.2kg
FAQ
Q: Which trucks fit?
A: Fit for Shacman Delong F3000, X3000, also compatible with some New M3000 models.
Note: It is AC condenser for cabin air conditioning, NOT engine water radiator.
Q: Where is it installed?
A: Mounted at front of truck, in front of engine water radiator. Installed between AC compressor and expansion valve.
Q: What is its function?
A: 1.Cool down high-temperature & high-pressure gaseous refrigerant from compressor, turn gas refrigerant into liquid by air flow.
2. Integrated receiver drier filters refrigerant and absorbs moisture, avoid ice block inside AC pipeline.
3. Ensure cabin air conditioning cooling performance.
Q:What problems can this part solve?
A:1.Clogged or bent fins cause weak AC cooling, no cold air under high temperature.
2. Punctured aluminum tube leads to refrigerant leakage, AC completely stops cooling.
3. Internal blockage results in intermittent cold air and high pressure compressor cut-off.
4. Failed built-in drier causes moisture inside AC system, ice block and compressor corrosion.
Hot Tags: ac condenser assembly / air conditioner condenser dz13241824370, China ac condenser assembly / air conditioner condenser dz13241824370 manufacturers, suppliers, factory, 12JSD160T-1707047, 612600060038, 81 25225 6464, DZ9112590185, Engine RADIATOR FAN 612600060038, FUEL TANK 400L DZ91189554780
