Haowo T7H cross tie rod ball joint, HOWO steering tie rod connector, Haowo chassis steering parts, straight tie rod assembly, outer ball joint of cross tie rod, truck steering ball joint, Haowo original factory ball joint, dump truck steering tie rod, heavy truck chassis parts, Haowo steering system parts
Steering Tie Rod End,Truck Ball Joint,Steering Drag Link,Steering Rod Joint,Tie Rod End Ball Head,Heavy‑Duty Truck Steering Parts
For SINOTRUK HOWO,For SITRAK C7H/T7H,Heavy Truck Chassis Parts,Commercial Vehicle Steering Linkage,Truck Repair Replacement Parts
Function
1. Transmit steering thrust and pull force: Installed at both ends of the steering cross-link rod tube, connecting the cross-link rod with the steering knuckle arm, it transmits the steering force to the front wheels to achieve left and right steering of the wheels.
2. Spatial angle compensation: Ball hinge structure, allowing the wheels to swing at multiple angles when jumping up and down or bumping, avoiding steering jamming.
3. Front wheel toe adjustment: Adjusting the toe parameters of the front wheels by screwing in the length of the cross-link rod tube, controlling tire wear.
4. Buffer road impact: Absorbing road bumps and shocks, reducing vibrations transmitted to the steering wheel.
Material
1. Ball head housing: 45# cast steel, fully forged, quenched and tempered, resistant to impact and compression.
2. Ball pin (ball head core): alloy structural steel, surface hardened, wear-resistant and pressure-resistant.
3. Ball seat bushing: wear-resistant copper-based composite material, reduces friction.
4. Dust cover: aged-resistant NBR rubber, isolates mud, water and dust, protects the internal ball hinge.
5. Threaded rod: high-strength alloy steel, left-handed thread; paired with slotted nuts + opening pins for locking.
Q: Product features
A: 1. The complete assembly is pre-assembled at both ends of the ball heads. It can be directly installed on the vehicle without any assembly.
2. The internal spring compensation mechanism automatically eliminates the gap when the ball pin wears out, reducing the looseness of the steering wheel.
3. Designed for heavy truck and heavy load conditions, it is shock-resistant and suitable for bumpy road conditions such as construction waste and mines.
4. The locking nut must be locked with an open pin. It is prohibited to drive without an open pin.
Q: Installation location & compatible vehicle models
A: Installation location: Between the steering gear arm and the front axle steering arm (straight tie rod, longitudinally arranged)
Compatibility: Haowo T7H, A7, Shandaka C7H/T7H 6x4, 8x4 tractors, dump trucks
Q:Common Faults
A:1. Increased gap between the ball joint: The steering wheel has excessive free play, the vehicle sways during driving, and there are abnormal noises when steering.
2. Bent pull rod tube due to collision or impact: The front wheel alignment is incorrect, and the tires are severely worn.
3. Dust cover damaged and dirt and sand enter, causing rapid wear and eventual failure of the ball joint.
Q: Assembly and Maintenance Tips
A: 1. The ball head conical contact surface should be kept clean. Do not apply grease to prevent slipping and loosening.
2. After the nut is tightened, an open pin must be installed for locking. It is strictly forbidden to omit the open pin.
3. Regularly add lubricating grease through the grease nipple; if the dust cover is damaged, the assembly must be replaced immediately.
Hot Tags: drag link ball joints wg9925430100/az9731430010, China drag link ball joints wg9925430100/az9731430010 manufacturers, suppliers, factory, 61500060131, CLUTCH DISC Clutch Plate HOWO WG9525160014, Dump Truck Valve Control Valve 2528 HYVA14750667 AC34 6, sinotruck parts, Weichai WP10 Engine Generator 1001828445, XCMG Reverse Parking Alarm 803504584
