Accelerator Cable DZ93189575007

Accelerator Cable DZ93189575007
Details:
OE: DZ93189575007 | Overall Length: 1980 mm
Compatibility: Shaanxi Auto DeLong New M3000, compatible with F3000, X3000.
Mechanical throttle cable, connects the driver's cab throttle pedal with the engine fuel control mechanism.
Send Inquiry
Description
Send Inquiry
Accelerator cable 2

Accelerator cable DZ93189575007
Mechanical transmission cables directly transfer the pedal stroke and pulling force of the driver to the engine speed control mechanism:
1. When the pedal is pressed down → The cable pulls the engine throttle, increasing the fuel supply, raising the speed and power;
2. When the pedal is released, relying on the engine return spring + pull wire to reset, reducing the fuel supply and lowering the speed;
3. Precisely control the engine output to achieve starting, acceleration, cruising, and deceleration;
4. It is a power control transmission component for the mechanical throttle version (different from the pure electronic throttle pedal).

 

1. The original factory calibration total length is 1980 mm. The connecting ends, adjusting threads, and fixing clips are fully compatible and can be directly replaced.
2. The inner core is a multi-strand twisted steel rope, which slides smoothly and has precise travel, without any jamming.
3. The outer sheath is equipped with a spiral dust-proof corrugated pipe to prevent sand and water from entering the inner sheath.
4. It has adjustable threaded connectors, allowing for fine adjustment of the free travel after installation.
5. It is resistant to stretching and repeated bending, suitable for the relative displacement and vibration between the cab and the engine.
6. It is resistant to high and low temperatures and engine compartment oil stains. The length is crucial and cannot be replaced by other lengths of pull lines.
7. The assembly comes with dust-proof rubber sleeves and buffer springs, reducing impact and wear.

Accelerator cable 1

 

 

Q: What is the function of this accelerator cable?

A:  It is a mechanical control cable. It transfers the movement of the accelerator pedal in the cab to the engine throttle mechanism, controlling fuel supply, engine speed and power output. It returns when you release the pedal.

Q: Which truck models fit DZ93189575007?

A: Designed for Shacman Delong New M3000, also compatible with F3000 and X3000. Overall length: 1980 mm. This part is for mechanical throttle. Please verify the OE number and total length before ordering.

Q: What materials are used?

A:Inner core: Multi-strand galvanized high-carbon steel wire

• Inner liner: HDPE plastic tube for low-friction sliding

• Outer sheath: Wear-resistant PVC

• Dust bellows: Oil-resistant modified PP

• Fittings & adjusting screw: Galvanized 45# carbon steel

• Dust boot: EPDM rubber

Q: What common symptoms require replacement?

A: Sticky or stuck throttle, pedal fails to return, excessive free play, slow throttle response, broken inner wire, rust and fraying, cracked dust boot, strange friction noise, complete cable failure with no acceleration control.

 


360albumviewerimgproc7791984360albumviewerimgproc7830453360albumviewerimgproc7885843

Hot Tags: accelerator cable dz93189575007, China accelerator cable dz93189575007 manufacturers, suppliers, factory, 612600060038, Fast Transmission Welding Shaft 12JSD160T 1707047, Front Right Engine Bracket DZ9112590186, Heavy Truck AC Evaporator Core, Heavy Truck HVAC Evaporator, PTO Power Takeoff QH70C G646

Send Inquiry