Material
1. Base material: ABS engineering plastic (molded), the exterior surface is painted (original vehicle red / blue etc. paint); the interior panel is black original ABS material, no painting.
2. Features: Resistant to sun aging, resistant to slight stone impact; brittle material, prone to cracking and breaking upon impact; not suitable for welding repair, breakage requires immediate replacement.
3. With snap-fit installation base, it comes with snap-fit holes, no need for a large number of bolts, the snap-fit is fixed on the cab frame.
Function
1. Air flow diversion: Guide the airflow towards the front of the vehicle to reduce wind resistance and lower fuel consumption at high speeds; Direct the airflow to avoid the car doors, reducing the splashing of mud and water from the doors during rainy days.
2. Exterior decoration: Covering the exterior component of the right front corner of the cab to beautify the corners of the cab.
3. Protection: Protecting the A-pillar wiring harness and the sheet metal of the cab corners, blocking stones from directly hitting the cab body.
Product features
1. Two-piece assembly structure: The inner panel H4531017201A0 serves as the base frame and is installed into the cab first; the outer panel H4531017401A0 is attached to the outer side of the inner panel. The outer panel is an exterior component, while the inner panel is a supporting and fixing component. The two must be used in pairs and cannot be used separately.
2. Outer panel: Visible exterior component, painted; Inner panel: Hidden component on the inner side, black, bearing the force of the snap fasteners. If the inner panel breaks, the outer panel will loosen, shake, and fall off.
3. Compatible vehicle models: OMMAN GTL, EST H4 platform; not applicable to the old model ETX, not applicable to the new model of Galaxy, the contour of the two is different and cannot be interchanged.
4. Left and right division, this one is the right side RH, do not confuse it with the left part number.
1. Left side LH: Outer panel H4531017301A0, Inner panel H4531017101A0. The left and right parts cannot be interchanged.
2. GTL/EST H4 is dedicated; the old ETX and Galaxy cab cannot be used.
3. The inner and outer panels are a set of components.
FAQ
Q: Which trucks do these two parts fit?
A: For Foton Auman GTL, EST H4 series heavy‑duty truck. Mounted on right‑hand front corner of cab. Not fit Auman ETX or Auman Galaxy model.
Q: What is the difference between H4531017401A0 and H4531017201A0?
A: H4531017401A0 Outer: Visible outer cover, painted surface, cosmetic part.
H4531017201A0 Inside: Black inner base support, hidden behind outer panel, holds all snap‑in clips.
They work as one matched kit. Inner panel must be installed first, then outer panel clips onto inner panel.
Q: What about left‑hand side replacement part numbers?
A: Left‑hand (LH) counterpart: Outer H4531017301A0, Inside H4531017101A0. Right‑hand and left‑hand are not interchangeable.
Q: Installation notes?
A:1. Fit H4531017201A0 inner panel onto cab frame first, make all clips fully seated.
2. Align H4531017401A0 outer panel and press to snap onto inner panel.
3. Check no gap and no loose after installation. Inspect cab sheet‑metal, bent metal will cause poor fitting.
Hot Tags: foton auman right corner panel assembly h4531017401a0 outer h4531017201a0 inside, China foton auman right corner panel assembly h4531017401a0 outer h4531017201a0 inside manufacturers, suppliers, factory, BATTERY COVER H0361030001A0, Engine Oil Cooler Assembly Foton OMV GTL 5536714 3696228 5536714, Foton Auman GTL CAB SHOCK H4502B01015A0, foton spare parts, FS19591, Fuel Filter FS1003
