LEFT REAR COMBINATION LIGHT W23604.45300.01W

Brake lights:

The left and right brake lights are an important part of the rear lights. They are placed on both sides of the rear lights and are red in color. Red has the meaning of warning. The brake light turns on when the brake is applied (including the handbrake). The brake light is to inform the following vehicles that their speed needs to be reduced or they should stop. The following vehicles can then prepare in advance. Nowadays, the brake lights are usually fog lights, which can penetrate thick fog. 

Reverse lights:

Functional division of the lamp body (integrated long strip three-section division)
The lamp surface is divided into three independent light-transmitting areas from left to right, with no light interference between them:
Transparent white area: Rear lights, white light for illuminating the blind spot at the rear of the vehicle when reversing
Main red light area: Headlights, brake lights, rear fog lights, three red lights integrated together
Amber yellow area: Turn signal lights, intermittent flashing warning during turning / lane changing
A transparent window for license plate light is reserved at the bottom, and a license plate lighting circuit is integrated.

The core of the turn combination lamp consists of a light source, a reflector, a lens and a housing. The light source is mostly an LED or a halogen bulb. The former is widely used due to its long lifespan and fast response. The reflector focuses the light through a curved surface design, and the lens further adjusts the light pattern to ensure clear visibility of the signal. Outer lamp cover: High-transparency PC polycarbonate material, resistant to UV aging, withstands high and low temperatures, scratch-resistant and impact-resistant, and does not yellow or crack over a long outdoor period.
Base shell: Black modified PP engineering plastic, resistant to engine oil, mud water, and construction salt and alkali corrosion, resistant to vibration and不易裂开.
Lighting source (01W LED model exclusive)： Built-in high-density surface-mounted LED bulbs, replacing traditional halogen bulbs, with high brightness, low power consumption, long lifespan, and fast response; models without the "W" suffix are halogen bulb base models.
Sealing structure： Full-circumference integrated nitrile rubber sealing ring, ultrasonic heat fusion sealing of the shell, protection level IP65, not prone to water ingress or fogging in rainy weather or when crossing water.
Fixing structure： 2 galvanized steel elongated fixing screws on the back, paired with M8 nuts and washers, rust-proof and corrosion-resistant.
Wiring interface： Original factory multi-pin straight plug waterproof wiring connector, the entire vehicle wiring harness is fully compatible and can be inserted without damage or rewiring.