RIGHT REAR COMBINATION LIGHT W23604.45400.01W

The rear combination lights refer to the brake lights, reversing lights, and turn signals.

Brake lights:

The left and right brake lights are important components of the rear lights. They are located on both sides of the rear lights and are red. Red has a warning meaning. The brake light turns on when the brake is applied (including the handbrake). The brake light indicates to the vehicles behind that the vehicle needs to slow down or stop, allowing the vehicles behind to prepare in advance. Nowadays, the brake lights are usually fog lights, which can penetrate thick fog. Some also use LED lights as brake lights.

Reverse lights:

The car reverse lights are installed at the rear of the vehicle and are used to illuminate the road behind the vehicle when reversing and serve as a warning to the vehicles behind and pedestrians.

Turn signals:

The rear turn signals are installed at the rear of the vehicle and are used to warn the vehicles behind when turning.

The rear combination lamp, also known as the combined tail lamp, is a combined type of lamp that integrates various functional signal lamps such as the rear position lamp, reversing lamp, brake lamp, rear fog lamp, turn signal lamp and reflector into a single lamp body. Among them, the brake lamp lights up when the driver steps on the brake pedal, emitting red light to alert vehicles behind to slow down or stop, and it can be divided into left and right brake lamps and a higher-positioned high-level brake lamp; the reversing lamp is illuminated when the vehicle is reversing, used to illuminate the rear road and alert vehicles behind and pedestrians; the turn signal lamp flashes when the vehicle turns or changes lanes, to alert the rear vehicles; the rear position lamp is commonly called the small lamp, mainly used to indicate the presence of the vehicle and its approximate width; the rear fog lamp helps to make the vehicle's rear more easily detectable in low-visibility environments.

The rear right tail light assembly is usually composed of a lamp housing, a reflective cover, lamp beads, a circuit board and a sealing component. The lamp housing is made of high-strength polycarbonate material, which has features such as impact resistance and strong weather resistance; the reflective cover is enhanced by an aluminum plating process to improve the light reflection efficiency; the lamp beads use LED light sources, which have advantages such as lower energy consumption, longer lifespan and faster response compared to traditional halogen bulbs. The circuit board integrates the driving module and the signal control unit, allowing for precise adjustment of the light brightness and flashing frequency. Its working principle is as follows: It receives signals such as steering and braking from the vehicle's onboard circuit, drives the corresponding lamp beads to emit light, and the light is focused by the reflective cover and projected outward to form a clear visual signal.