A/C BLOWER MOTOR H4811010005A0

A/C BLOWER MOTOR H4811010005A0
Details:
English product name: Blower Motor Assembly / Heater Blower Fan Motor
• Voltage: 24V (standard for heavy trucks)
• Weight: Approximately 2.4 - 2.6kg
• Installation location: Inside the driver's cabin dashboard, HVAC air conditioning box assembly, and intake end of the air conditioning heating system.
Send Inquiry
Description
Send Inquiry
Evaporation fan 1

Material
1. Shell and rotor blades: High-temperature resistant modified PP engineering plastic, anti-aging, resistant to cold and hot cycles, and not prone to deformation or cracking.
2. Motor core: Metal DC motor, pure copper winding, carbon brush structure; metal bearings.
3. Base support: Reinforced PP plastic, equipped with original factory positioning snap-in and installation holes.
The entire set is a double rotor integrated assembly, with the motor in the center, two centrifugal rotor blades on the left and right, not a single-rotor small blower.

Functions
1. Provide air power for the cab air conditioning and heating system, driving the air circulation inside the vehicle.
2. Cold air mode: Inhaled air passes through the evaporator box for cooling and is then sent to the cab to provide cold air.
3. Heating mode: Air passes through the heating small water tank (H4811010006A0) for heating and outputs warm air.
4. Windshield defrosting and dehumidifying: Provides air flow to blow on the front windshield to remove fog.
5. Internal and external air circulation: Cooperates with the air conditioning damper to achieve new air intake or internal circulation inside the vehicle.

Evaporation fan 2

 

 

Evaporation fan 4

Features
1. Integrated double centrifugal impeller assembly, with sufficient air volume, suitable for heavy truck large cabs; 24V DC motor.
2. Pure copper motor windings, wear-resistant carbon brushes, low operating noise, resistant to bumps and vibrations, suitable for harsh working conditions of heavy-duty trucks.
3. High-temperature resistant plastic housing, does not deform in the cab under high-temperature conditions.
4. OE replica at 1:1 scale, installation holes and plug interfaces fully match the original vehicle, direct replacement, no need for modification or cutting.
5. Complete assembly for shipment: motor + left and right wind wheels + outer housing base set.
6. Can be combined with speed control resistors to achieve multi-speed air volume adjustment.

 

FAQ

Q: Which truck fits this blower motor?

A: Fits FOTON AUMAN GTL, ETX Annual Version heavy‑duty truck, tractor, dump truck, mixer truck.

Note: Not compatible with Auman EST, EST OE: H4811010300A0.

Q: Voltage of this blower?

A: 24V DC for heavy truck.

Q: What material is it made of?

A: High‑temperature resistant PP plastic housing & impeller, copper winding DC motor.

Q: What are common failure symptoms?

A: No air blowing, only high‑speed gear works, abnormal noise, shaking vibration. Usually caused by worn carbon brush or bearing damage.

 


360albumviewerimgproc7791984360albumviewerimgproc7830453360albumviewerimgproc7885843

Hot Tags: a/c blower motor h4811010005a0, China a/c blower motor h4811010005a0 manufacturers, suppliers, factory, 3519200-HF-16016H, 380 Complete Air Dryer 4324210280/H0356F02002A0, 380 Oil Filter LF14000NN 4331005, DRAG LINK 1325130002002, Fuel Filter FS1003 , H4101020003A0

Send Inquiry